Na}{

File Content: `folders.md`

---
title: folders
section: 5
description: Folder Structures Used by npm
---

### Description

npm puts various things on your computer.  That's its job.

This document will tell you what it puts where.

#### tl;dr

* Local install (default): puts stuff in `./node_modules` of the current
  package root.
* Global install (with `-g`): puts stuff in /usr/local or wherever node
  is installed.
* Install it **locally** if you're going to `require()` it.
* Install it **globally** if you're going to run it on the command line.
* If you need both, then install it in both places, or use `npm link`.

#### prefix Configuration

The `prefix` config defaults to the location where node is installed.
On most systems, this is `/usr/local`. On Windows, it's `%AppData%\npm`.
On Unix systems, it's one level up, since node is typically installed at
`{prefix}/bin/node` rather than `{prefix}/node.exe`.

When the `global` flag is set, npm installs things into this prefix.
When it is not set, it uses the root of the current package, or the
current working directory if not in a package already.

#### Node Modules

Packages are dropped into the `node_modules` folder under the `prefix`.
When installing locally, this means that you can
`require("packagename")` to load its main module, or
`require("packagename/lib/path/to/sub/module")` to load other modules.

Global installs on Unix systems go to `{prefix}/lib/node_modules`.
Global installs on Windows go to `{prefix}/node_modules` (that is, no
`lib` folder.)

Scoped packages are installed the same way, except they are grouped together
in a sub-folder of the relevant `node_modules` folder with the name of that
scope prefix by the @ symbol, e.g. `npm install @myorg/package` would place
the package in `{prefix}/node_modules/@myorg/package`. See
[`scope`](/using-npm/scope) for more details.

If you wish to `require()` a package, then install it locally.

#### Executables

When in global mode, executables are linked into `{prefix}/bin` on Unix,
or directly into `{prefix}` on Windows.  Ensure that path is in your
terminal's `PATH` environment to run them.

When in local mode, executables are linked into
`./node_modules/.bin` so that they can be made available to scripts run
through npm.  (For example, so that a test runner will be in the path
when you run `npm test`.)

#### Man Pages

When in global mode, man pages are linked into `{prefix}/share/man`.

When in local mode, man pages are not installed.

Man pages are not installed on Windows systems.

#### Cache

See [`npm cache`](/commands/npm-cache).  Cache files are stored in `~/.npm` on Posix, or
`%AppData%/npm-cache` on Windows.

This is controlled by the `cache` configuration param.

#### Temp Files

Temporary files are stored by default in the folder specified by the
`tmp` config, which defaults to the TMPDIR, TMP, or TEMP environment
variables, or `/tmp` on Unix and `c:\windows\temp` on Windows.

Temp files are given a unique folder under this root for each run of the
program, and are deleted upon successful exit.

### More Information

When installing locally, npm first tries to find an appropriate
`prefix` folder.  This is so that `npm install foo@1.2.3` will install
to the sensible root of your package, even if you happen to have `cd`ed
into some other folder.

Starting at the $PWD, npm will walk up the folder tree checking for a
folder that contains either a `package.json` file, or a `node_modules`
folder.  If such a thing is found, then that is treated as the effective
"current directory" for the purpose of running npm commands.  (This
behavior is inspired by and similar to git's .git-folder seeking
logic when running git commands in a working dir.)

If no package root is found, then the current folder is used.

When you run `npm install foo@1.2.3`, then the package is loaded into
the cache, and then unpacked into `./node_modules/foo`.  Then, any of
foo's dependencies are similarly unpacked into
`./node_modules/foo/node_modules/...`.

Any bin files are symlinked to `./node_modules/.bin/`, so that they may
be found by npm scripts when necessary.

#### Global Installation

If the `global` configuration is set to true, then npm will
install packages "globally".

For global installation, packages are installed roughly the same way,
but using the folders described above.

#### Cycles, Conflicts, and Folder Parsimony

Cycles are handled using the property of node's module system that it
walks up the directories looking for `node_modules` folders.  So, at every
stage, if a package is already installed in an ancestor `node_modules`
folder, then it is not installed at the current location.

Consider the case above, where `foo -> bar -> baz`.  Imagine if, in
addition to that, baz depended on bar, so you'd have:
`foo -> bar -> baz -> bar -> baz ...`.  However, since the folder
structure is: `foo/node_modules/bar/node_modules/baz`, there's no need to
put another copy of bar into `.../baz/node_modules`, since when it calls
require("bar"), it will get the copy that is installed in
`foo/node_modules/bar`.

This shortcut is only used if the exact same
version would be installed in multiple nested `node_modules` folders.  It
is still possible to have `a/node_modules/b/node_modules/a` if the two
"a" packages are different versions.  However, without repeating the
exact same package multiple times, an infinite regress will always be
prevented.

Another optimization can be made by installing dependencies at the
highest level possible, below the localized "target" folder.

#### Example

Consider this dependency graph:

```bash
foo
+-- blerg@1.2.5
+-- bar@1.2.3
|   +-- blerg@1.x (latest=1.3.7)
|   +-- baz@2.x
|   |   `-- quux@3.x
|   |       `-- bar@1.2.3 (cycle)
|   `-- asdf@*
`-- baz@1.2.3
    `-- quux@3.x
        `-- bar
```

In this case, we might expect a folder structure like this:

```bash
foo
+-- node_modules
    +-- blerg (1.2.5) <---[A]
    +-- bar (1.2.3) <---[B]
    |   `-- node_modules
    |       +-- baz (2.0.2) <---[C]
    |       |   `-- node_modules
    |       |       `-- quux (3.2.0)
    |       `-- asdf (2.3.4)
    `-- baz (1.2.3) <---[D]
        `-- node_modules
            `-- quux (3.2.0) <---[E]
```

Since foo depends directly on `bar@1.2.3` and `baz@1.2.3`, those are
installed in foo's `node_modules` folder.

Even though the latest copy of blerg is 1.3.7, foo has a specific
dependency on version 1.2.5.  So, that gets installed at [A].  Since the
parent installation of blerg satisfies bar's dependency on `blerg@1.x`,
it does not install another copy under [B].

Bar [B] also has dependencies on baz and asdf, so those are installed in
bar's `node_modules` folder.  Because it depends on `baz@2.x`, it cannot
re-use the `baz@1.2.3` installed in the parent `node_modules` folder [D],
and must install its own copy [C].

Underneath bar, the `baz -> quux -> bar` dependency creates a cycle.
However, because bar is already in quux's ancestry [B], it does not
unpack another copy of bar into that folder.

Underneath `foo -> baz` [D], quux's [E] folder tree is empty, because its
dependency on bar is satisfied by the parent folder copy installed at [B].

For a graphical breakdown of what is installed where, use `npm ls`.

#### Publishing

Upon publishing, npm will look in the `node_modules` folder.  If any of
the items there are not in the `bundleDependencies` array, then they will
not be included in the package tarball.

This allows a package maintainer to install all of their dependencies
(and dev dependencies) locally, but only re-publish those items that
cannot be found elsewhere.  See [`package.json`](/configuring-npm/package-json) for more information.

### See also

* [package.json](/configuring-npm/package-json)
* [npm install](/commands/npm-install)
* [npm pack](/commands/npm-pack)
* [npm cache](/commands/npm-cache)
* [npm config](/commands/npm-config)
* [npmrc](/configuring-npm/npmrc)
* [config](/using-npm/config)
* [npm publish](/commands/npm-publish)
Name	Size	Permission
folders.md	7978 bytes	0644
install.md	2939 bytes	0644
npm-shrinkwrap-json.md	1251 bytes	0644
npmrc.md	3860 bytes	0644
package-json.md	31506 bytes	0644
package-lock-json.md	10242 bytes	0644
File Content: folders.md

File Content: `folders.md`
